Drainage channels

System HYDROblock

Load class F 900
Nominal width: 100, 150, 200, 300 mm
Monolithic drainage channel system made of ductile iron, EN 1433, Type I
Application areas: Areas that require long-term traffic safety, container terminals, industrial areas with heavy traffic loads, airports and race circuits
Minimal planning and installation requirement, low weight, low maintenance,
rattle free
Theft and vandalism protection
Safety slot system suitable for driving over at right angles and longitudinally

Load class F 900
Flat drainage channel made on one ductile iron piece
Application areas: low height of construction, indoor car parks,
terraces, industrial plants, pedestrian areas, areas with low rainfall
such roofed places, arcades, platforms, evaporation channel
Low requirements for construction work
Extreme resistant, one piece = rattle free
Easy cleaning

Load class F 900
Flat drainage channel made of aluminium and powder-coated
Application areas: low height of construction, indoor car parks,
terraces, industrial plants, pedestrian areas, areas with low rainfall
such roofed places, arcades, platforms, evaporation channel
Low requirements for construction work
Extreme resistant, one piece = rattle free, pedestrian-friendly
Easy cleaning

Load class: C 250, D 400, E 600, F 900
Nominal width: 100, 150, 200 mm
Gratings: ductile iron grating with longitudinal or cross slots or mesh grating
Application areas: Industrial areas with heavy traffic, airports,
traffic area construction, loading and unlaoding areas
Screwless, patented grating locking system
Ductile iron edge protection
Fiber-reinforced concrete C35/45 channel
EN 1433, DIN 19580, Type M

Load class F 900
Nominal width: 100, 150, 200 mm
Gratings: ductile iron grating
Application areas: Industrial areas with heavy traffic, airports,
race circuits, traffic area construction, loading and unloading areas
Two special screw bars per grating
Ductile iron edge protection
Fiber-reinforced concrete C35/45 channel
EN 1433, DIN 19580, Type M

Load class: E 600, F 900
Nominal width: 300, 400 mm
Gratings: ductile iron grating
Application areas: Industrial areas with heavy traffic, airports,
race circuits, traffic area construction, loading and unlaoding areas
With damping insert
Two special screw bars per grating
Ductile iron edge protection
Fiber-reinforced concrete C35/45 channel
EN 1433, DIN 19580, Type M

Load class: A 15, B 125, C 250
Nominal width 100 mm
Gratings: galv. slotted grating, galv. mesh grating, iron slotted grating
Application areas: garage and patio drainage, domestic driveways,
forecourt drainage, terraces
Practical system for easy D.I.Y. installation